A table for six taken by a couple, a two-top turned away for lack of a slot, a dinner that runs twenty minutes over: most lost covers do not come from a lack of demand, but from a floor plan and table turnover that are poorly set up. On SevenRooms, it all comes down to four places: tables and their capacities, combinations, service durations, and the reports that tell you whether those settings match reality.
This guide shows where to set each element, how to read the Revenue Management reports (Table Occupancy, Table Capacity Optimization, Duration Optimization, Performance Comparison) and what to change next. It also covers the June 2026 release, Flexible Table Capacity, which adjusts capacities to forecast demand.
Setting up your SevenRooms floor plan: Floorplan Layouts, tables and capacities
Your floor plan is a Floorplan Layout: an arrangement of tables, each with a minimum and maximum capacity, that feeds your availability directly. SevenRooms creates a Default Floorplan Layout at onboarding, also used for your Shift availability. You can create others (a two-top layout for Valentine's Day, a large-party layout for the holidays) and attach them to Shifts or dates.
To add tables:
- In the web portal, open Settings > Floorplan > Floorplan Layouts.
- Click the three dots next to the layout you want to edit, or Add Floorplan Layout.
- Click + Add Table, pick a shape and place it on the plan.
- Fill in the name, the Seating Area (a zone of the room: terrace, dining room, counter), the minimum and maximum capacity, the shape and the size.
- Click Save.
A table without a Seating Area is not part of your Shift inventory: it will never be offered online. A deactivated table (Deactivate) is not deleted: it stays under Inactive Tables.
For a one-off arrangement, duplicate the layout (three dots, Duplicate) without touching the original. To link a layout to a Shift: Settings > Shifts, the Shift, Edit, then Properties > Floorplan Layout.
Fictional example. A four-top set to 1-4 accepts solo diners and eats into your Saturday covers. Set to 2-4, it protects the table.
The māhie advice: māhie audits your tables, capacities and Seating Areas, spots tables that cannot be booked online, and builds the layouts you need (holidays, events) with your floor team.
Table Combinations: more combinations, more flexibility
A Table Combination links several tables to seat a larger party, and gives the availability algorithm more options.
- Open the layout in Settings > Floorplan > Floorplan Layouts.
- Click a table, hold Shift and click the others.
- Click + Add Combination.
- Enter the minimum and maximum capacity of the group, then Create (you can also name it).
The overview is in Settings > Floorplan > Table Combinations, layout by layout (Launch Editor). Fictional example: two four-tops pushed together form a 6-8 combination for groups. Auto-assign (automatic table assignment) always prefers a single table over a combination. For group enquiries that arrive by messaging, Heep qualifies the request (date, budget, covers, contact) and books directly in SevenRooms.
Service durations and Reservation Statuses: where turnover is set
Turnover depends on the Duration: how long a reservation blocks a table before it becomes available again. It is set per party size in Settings > Availability Settings > Shifts, under Durations, with three ready-made presets (Standard, Extended, Quick).
Buffers (15, 30, 45 or 60 minutes) are added after a reservation to give your team time to clear and reset, without inflating the actual duration. On the Shift: Edit > Capacity Settings > Add buffer time after reservation, with the party size it applies to (1 for all). Package-dependent feature.
For a specific experience (tasting menu, chef's counter, private room), an Access Rule can have its own duration: Settings > Availability > Access Rules, the rule, Edit, Additional Settings > Durations > Edit, then turn off Follow Shift Settings for Durations. More in our Access Rules guide.
Reservation Statuses produce the turnover data. In Settings > Floorplan > Reservation statuses there are two families: Pre-Service (before arrival) and In-Service (once guests are seated). You can switch them on or off, rename them, change colour and order, and add your own with Add Status (no email or SMS is triggered). Each In-Service status accepts a threshold in minutes: beyond it, the timer turns red on the iPad. Setting 30 minutes on "Main Course" flags tables that are lingering.
Watch out: if a cancellation or no-show fee is active, the card on file is charged as soon as the status moves to Cancelled or No Show.
The māhie advice: poorly maintained statuses distort every duration report. māhie audits your durations, Buffers and statuses, compares them with your real service times and trains your hosts to set statuses at the right moment.
Reading the Revenue Management reports to optimise table turnover
The reports under Reporting > Revenue Management compare your settings with reality: occupied tables, party sizes searched, meal durations. Table Occupancy, Table Capacity Optimization and the Insights depend on your package; Duration Optimization is reserved for Growth and Premium. If a report is missing, your package may not include it.
Table Occupancy: when the room fills up
This report plots occupancy hour by hour: the minutes each table was occupied, divided by the minutes available. Fictional example: 10 tables x 60 minutes = 600 available minutes; 7 tables occupied for the full hour = 420 minutes, or 70%. A four-top with a single diner counts as occupied. Download the hourly and daily data to spot your quiet periods.
Table Capacity Optimization: do your tables match demand?
On the left, the party sizes searched on the widget; on the right, the ones booked. If the two black lines differ, guests are searching for a size you serve poorly. The under-seated tables view calculates potential (reservations x max capacity), empty seats and their percentage; a table group only appears from 50 covers. Fictional example: 60 reservations on 2-5 tables, so 300 potential seats, for 150 covers: 150 empty seats, 50%.
Duration Optimization: is your duration right?
The grey diamond is the configured duration, the teal bar the average turn time. The Notice column flags a gap of 15 minutes or more in red, 7.5 to 15 in orange. A positive gap above 7.5 suggests shortening the duration (changes are made in 15-minute steps); a negative gap of 15 or more suggests lengthening it. Fictional example: duration set to 90 minutes, average turn 72, gap of 18: move to 75. The Show Only if Reservation Quantity filter stops you deciding on a handful of cases. If your team marks Left late, averages inflate.
Performance Comparison: this month against the same month last year
This report compares last month with the same month a year earlier: total covers, direct-channel covers, Average Spend per Cover (for reservations linked to a POS check), repeat-guest rate. The percentage shown is a percentage of the previous month: subtract 100 to get the change.
Depending on your package, the Revenue Management Insights, generated on the 1st of each month, also flag tables without a Seating Area, layouts without combinations and durations that are too long. To choose which numbers to track each week, read Restaurant KPIs: weekly tracking.
With māhie: in Data & reporting, māhie connects your SevenRooms exports to a dashboard, tracks occupancy, durations and party sizes every week, and turns the reports into clear configuration actions.
Flexible Table Capacity: adjusting capacities to demand (new in 2026)
Flexible Table Capacity automatically changes the minimum number of covers per table according to forecast demand: stricter at hot times, looser at quiet times. Package-dependent feature: if it does not appear, your package may not include it.
A machine learning model predicts how busy each slot will be up to 30 days ahead, from 30+ signals (booking pace, seasonality, history). Each 15-minute slot is labelled:
- Hot (top 20% of occupancy): larger tables are kept for larger parties.
- Cold (bottom 20%): smaller parties can take tables that would otherwise sit empty.
- Default: your standard configuration.
By default, in cold periods SevenRooms accepts parties down to 3 seats below the table's maximum; in hot periods the table only accepts its maximum. SevenRooms' example: a table with a maximum of 4 becomes 1-4 when cold and 4-4 when hot. An 8-10 combination becomes 7-10, then 10-10.
Statuses refresh before service: 6 hours before, a Hot slot reverts to Default (so you never see a Hot slot during service); 1 hour before, a Default slot becomes Cold.
To enable it:
- Go to Availability Settings > Floorplan Layout.
- Click the three dots next to your Standard Mode, then Edit.
- Turn on Enable Flexible Table Capacity.
- Apply the mode to your Shifts: Settings > Floorplan Layout Modes, the pencil next to Shifts, drag and drop Shifts into the mode's column, save. Or Shift by Shift: Availability Settings > Shifts > Edit All Days.
SevenRooms recommends enabling it across all Shifts with the default settings. Optional: Capacity Release Rules, Customize by Table Size and Table Overrides (+ Add Table Override, with Minimum Party Size (Cold) and (Hot)) for a premium booth or a chef's table.
In the Grid, a blue dot marks a Cold slot, a red dot a Hot one. A reservation made in a cold period carries a blue banner: it may occupy a larger table than usual. To liven up cold slots in other ways, read filling quiet services with AI.
What to adjust based on what your reports show
Each signal points to one setting: change one lever at a time, then reread the report a month later.
- Low occupancy on a recurring slot (Table Occupancy): enable Flexible Table Capacity, review your Access Rules (see the availability case studies).
- Lots of empty seats on one table type (Table Capacity Optimization): lower the maximum, add combinations.
- Positive duration gap above 7.5 minutes (Duration Optimization): remove 15 minutes for that party size.
- Negative gap of 15 minutes or more: lengthen the duration, or add a Buffer.
- Monthly results falling (Performance Comparison): go back to the other reports.
Common mistakes: changing five settings at once, deciding on too few reservations, forgetting that Table Capacity Optimization reads the standard configuration (not your alternate layouts), letting hosts forget Left.
Table layout and turnover on SevenRooms: frequently asked questions
Which SevenRooms report should I look at first to improve turnover?
Start with Duration Optimization, which compares the configured duration with the average turn time by party size. It is reserved for Growth and Premium packages. Without it, check your durations in the Shifts and read Table Occupancy to find quiet hours.
Is Flexible Table Capacity included in every package?
No. SevenRooms states that the feature is only available on select packages. If Enable Flexible Table Capacity does not appear in your Floorplan Mode, ask SevenRooms Support to check your package.
How do I accept a party larger than my tables?
Create a Table Combination: select several tables in the editor with Shift, click + Add Combination and enter the minimum and maximum capacity. Auto-assign still prefers a single table over a combination when both fit.
Why are my average durations sometimes wrong?
If the team marks Left late, the average turn looks longer. A status set at the right moment remains the best basis for a decision.
Need help optimising your floor plan and table turnover?
māhie works with 90+ venues and has 60+ SevenRooms deployments behind it. On this topic, we can:
- audit your floor plan: tables, capacities, Seating Areas, combinations, alternate layouts;
- audit your durations and Buffers against real service times;
- configure Flexible Table Capacity, Floorplan Modes and Table Overrides if your package includes it;
- set up weekly reporting (occupancy, durations, party sizes) within our Data & reporting offer;
- train your teams on Reservation Statuses, and connect Heep for groups and quiet-slot follow-ups, and Painapo to track ad spend, conversions and revenue.
Want to fill your room without throwing it off balance? Discover our SevenRooms expertise and our Data & reporting offer, or Contact māhie.

