Home/Resources

SevenRooms & CRMMarch 202610 min read

SevenRooms availability: 7 practical cases for managing your hours

Close dates, change one day's hours, build a seasonal Schedule, remove a Shift: 7 practical cases in the Availability Hub, with exact steps and traps to avoid.

A beach attendant carrying a striped deckchair

On December 25, the brasserie is closed, and the booking widget still offers tables. Or the opposite: you extend service on December 31, and nobody can book after 10 pm. Managing your availability on SevenRooms comes down to a few simple actions, but each one has its own setting, and picking the wrong one costs covers.

This guide walks through 7 practical cases, from closing a single date to changing your standard hours. For each: when to use it, the exact steps, and the trap to avoid.

SevenRooms availability: Schedules, Shifts, Overrides and Closures, the basics

Everything is managed from one screen, the Availability Hub (Settings > Availability > Availability Hub). The actions below all happen in its Schedules tab, a weekly calendar.

Four terms to know:

  • Schedule: your recurring plan, all your services across the week. One Schedule is active, others can be scheduled for the future.
  • Shift: a service (Lunch, Dinner, Brunch) with its days, hours and settings. A Shift must be active to accept a reservation or seat a guest without one (a walk-in).
  • Override: a temporary change that replaces the Schedule on one date or a period. When it ends, the normal Schedule resumes.
  • Closure: a closed date. No Shifts and no availability on the dates concerned.

The rule of thumb: closed all day is a Closure; open but different is an Override; a lasting change is an edit to the Schedule or a new Schedule.

Worth knowing: SevenRooms documentation also describes an older screen, Settings > Availability Settings > Shifts, where the choices are called Override just this day, Edit following days and Edit all days. It does not say which venues already have the Availability Hub. If you don't see it, ask your SevenRooms contact.

The māhie tip: before changing anything, take stock. We audit your Shifts (overlaps, forgotten services, outdated hours) and your Access Rules, because they, not the Shift, decide what a guest can book online. Our Access Rules guide covers that second layer.

Case 1: closing one or more dates on SevenRooms

Create a Closure for Christmas, New Year's Day, a full buyout or renovation work: it removes every Shift and all availability on the dates you choose.

To close one date:

  1. Go to Settings > Availability > Availability Hub, Schedules tab.
  2. Hover over the date on the calendar and click the pencil icon.
  3. Choose Close This Date.
  4. Name the closure ("Christmas", "Private event") or leave it blank: the default name is Closed.
  5. Click Close This Date Only.

The date turns gray and is labeled Closed. To close several dates, do steps 1 to 4, then choose Close Multiple Dates, enter the date range and confirm.

To reopen: hover over the closure, click the pencil icon, select the dates to restore and confirm. The normal Schedule comes back.

Trap: a Closure is not a Blackout. A Blackout Date only switches off online reservations for the entire day, and your team can still book by hand (Blackout icon at the top right of the Reservations tab, or Settings > Availability > Blackout Dates for several dates). A Blackout does not close inventory on third-party sites (OpenTable, Resy, Tock). For a Closure, the documentation says nothing about third-party channels or about reservations already taken: check your channels afterwards, and review the date's reservation list before closing so you can warn guests.

Cases 2 and 3: changing hours for one day, or for a period

To change one service on one day, create a Shift Override. For several days or weeks, create a Schedule Override. Either way, your usual Schedule stays untouched.

Case 2, changing the hours of a single day. When: a later dinner on December 31, shorter brunch on a bank holiday.

  1. Settings > Availability > Availability Hub, Schedules tab.
  2. Go to the date and click the Shift concerned.
  3. Click Edit, then Create Override.
  4. Change the start and end times, then save.

Only that date changes. Trap: the Shift sets the window in which you can serve, not what guests can book online, which is controlled by Access Rules. Fictional example: a Shift from 6 pm to 11 pm, but an Access Rule that stops at 9:30 pm. Extending the Shift does not make 10 pm bookable online until the Access Rule is adjusted. Two Shifts cannot overlap, even if one ends the exact minute the next begins.

Case 3, changing the Schedule for a period. When: extended hours over the holidays, a terrace open for a few weeks.

  1. In the Schedules tab, go to the first date of the change.
  2. Hover over it, click Edit This Date, then Edit from This Date Onward.
  3. Choose the end date.
  4. Give it a clear name: Holiday Hours, Summer Patio Service.
  5. Edit the Shifts and their hours.
  6. For each Shift, check Reservation Types, Seating Areas, tables, statuses and bookable times, then save.

Trap: an Override with no end date runs indefinitely. If the change is temporary, set the end date when you create it. And if the venue is closed for the whole period, don't create an Override: create a Closure (case 1).

The māhie tip: the holidays are prepared in November, not on December 20. māhie prepares your year-end calendar in SevenRooms with you: Closures for the 25th and the 1st, Overrides for extended evenings, prepaid experiences. Our article on the Christmas menu and prepaid New Year's Eve covers the payment side.

Cases 4 and 7: a seasonal Schedule, or new standard hours

If your hours change from a given date and for good, don't create an Override: create a future Schedule, or edit the active one.

Case 4, creating a seasonal or future Schedule. When: summer or winter hours, opening the terrace, new services from a given date.

  1. Schedules tab, go to the start date of the new plan.
  2. Hover over it and click the pencil icon.
  3. Choose Edit this date, then Edit from this date onward.
  4. Enter an end date or leave it open-ended.
  5. Click Create Schedule and name it: Summer Schedule, Winter Hours.
  6. Configure the Schedule's Shifts and check each one's hours, Seating Areas, Reservation Types, tables, statuses and bookable times.
  7. Save.

The new Schedule waits under Future Schedules & Overrides and replaces the old one on its activation date. Fictional example: the old Schedule stays active through April 30, and the "Summer Schedule" takes over on May 1 with the terrace. Before it activates, edit it from its pencil icon or its banner, then Edit Schedule.

Trap: a new Schedule is configured Shift by Shift, and a mistake shows on the day itself. Review every Shift ahead of time, and check your Access Rules: an Access Rule not attached to an active Shift shows nothing online (the Access Rule Overview page flags these rules as "Unassigned").

Case 7, changing standard hours. When: dinner now runs 5 pm to 11 pm every day, or you add a Friday lunch.

  1. Schedules tab, find the active Schedule at the top of the list.
  2. Click its pencil icon (or its banner on the calendar, then Edit Schedule).
  3. Change the Shifts and their start and end times.
  4. Save.

Trap: the change applies to all dates except those covered by an Override or a Closure. During a "Holiday Hours" Override, your new hours do not apply. If the change only starts at a future date, use case 4.

Cases 5 and 6: removing a Shift, adding a special experience

A Shift is removed for one date or for all dates. An experience is added in two steps: create the Reservation Type, then apply it to a Shift.

Case 5, removing a Shift temporarily or permanently. When: no brunch on one Sunday (private event), a discontinued service, a seasonal Shift to delete.

  1. Schedules tab, go to the date.
  2. Click the Shift, then Remove.
  3. Choose to remove it from the selected date only, or Every Shift in Default Schedule for all dates.
  4. Confirm.

Trap: the second option deletes the Shift from every day of the Schedule. For a temporary gap, remove it from a single date, or create a Schedule Override for the period. Removing a Shift is not closing the date: the day's other Shifts stay open.

Case 6, adding a special experience to a Shift. A Custom Reservation Type is a separately bookable offer: a prix-fixe menu, a wine tasting, a holiday meal, a chef's counter. When: a Valentine's Day dinner, a seasonal brunch.

Create the offer:

  1. Settings > Availability > Availability Hub, Reservation Types tab.
  2. Create a Custom Reservation Type, or start from an available template.
  3. Fill in the guest-facing name, description, images and labels, then check the preview.
  4. Save.

Apply it:

  1. Go back to the Schedules tab and select the Schedule, date or Shift.
  2. Pick the right option: edit the Schedule for a permanent offer, create a Schedule Override for a period, Edit This Date Only for one day, Create Shift Override for one Shift on one day.
  3. Open the Shift and apply the Reservation Type.
  4. Set the Seating Areas, tables, statuses and bookable times, then save.

Example: for a prix-fixe dinner on February 14, create the Reservation Type, then an Override on that single date applied to the Dinner Shift.

Trap: the experience exists only for the dates, times and settings you configured. The documentation doesn't detail how Reservation Types relate to Access Rules and prepayment: for a prepaid offer, also read our guide to the prepaid New Year's Eve.

Checking your SevenRooms availability: what guests actually see

After every change, check the result from the guest's side: a correct Shift does not guarantee online availability, because Access Rules, Blocks and Blackouts sit on top of it.

  • Availability Quick View (Reservations > Availability Quick View or Settings > Availability, Dining venues): a grid by party size and time. Green: available online. Red: unavailable, click to see why. Gray: no active Shift.
  • Internal search: Add Reservation, then date, time and party size. Room internally but not on the widget? Look at your Access Rules.
  • Live widget: test it yourself from Settings > Reservation Widget Settings.

To close only an area or part of the day, neither a Closure nor a Blackout fits: add a Block (Reservations > Add Block, or a Grid cell then Add Block). It can target tables, an area, a Shift or a time range, and it also blocks internal bookings, except for users allowed to override it.

The māhie tip: when hours change, questions arrive by message: "Are you open on the 31st?", "Is there room at 10 pm?" Heep, our AI host, answers on WhatsApp, Instagram, email or SMS and books directly in SevenRooms. According to Heep, 55% of messages arrive during service or when the restaurant is closed. māhie connects it to SevenRooms and also trains your teams on the actions in this guide: a manager who can set a Closure doesn't have to call a contractor on a service night.

SevenRooms availability: frequently asked questions

What is the difference between a Closure and a Blackout Date on SevenRooms?

A Closure removes every Shift on one or more dates: no availability at all. A Blackout Date only switches off online reservations for the entire day, and your team can keep booking internally.

How do I change the hours of a single day without touching my usual Schedule?

In the Availability Hub, Schedules tab, click the date's Shift, then Edit and Create Override, and change the hours. Only that date is affected.

What happens when an Override ends?

The Schedule that would otherwise be active resumes automatically. Set an end date when you create it, otherwise it keeps running indefinitely.

Why don't my new hours show up on the booking widget?

Often because Access Rules still limit the bookable hours online, or because a Block, Blackout, Override or Closure covers the date. Availability Quick View shows why a time slot is red.

Need help managing your SevenRooms availability?

An Override mistake on a December Saturday costs you empty tables. māhie knows the traps in every SevenRooms setting. On this topic, we can:

  • audit your Shifts, Schedules and Access Rules: overlaps, forgotten services, unattached rules;
  • prepare your holiday and seasonal calendar: Closures, Overrides, future Schedules, special experiences;
  • train your managers and front desk on the actions in this guide, using cases from your own services;
  • connect Heep to SevenRooms to answer questions about hours and take bookings, even during service.

Discover our SevenRooms expertise and the Heep AI host, or contact māhie: we'll review your setup together.

Corentin
CorentinFounder of māhie